Winmate I330EAC-IKW, User Manual

Page: 9 / 76

9
Chapter 2: Hardware Installation
Chapter 2: Hardware Installation
2.1 Mounting
I330EAC-IKW Embedded Computer supports table mounting.
Mounting Instruction:
1. Fasten screws to secure L-shape mounting brackets to the I330EAC-IKW.
2. Insert the I330EAC-IKW into the fixture (ex. rack) and fasten screws to secure the unit.
2.2 Connecting the Power
The DC power supply connector of the I330EAC-IKW Embedded Computer is on the front panel.
Warning!
Ensure voltage and polarity is compliant with the DC input. Improper input voltage or
polarity can cause system damage.
Avertissement!
Assurez-vous que la tension et la polarité sont conformes à
l'entrée CC. Une tension d'entrée ou une polarité incorrecte peut endommager le
système.
Warning!
Connect the I330EAC-IKW either to AC power or DC power. Do not perform both
connections at the same time.
Avertissement!
Connectez l'I330EAC-IKW à une alimentation CA ou CC.
N'effectuez pas les deux connexions en même temps.
Connecting to DC Power
Connect open wire cable (not supplied by Winmate) to 9-36V DC, maximum power source 220W.