I330 Motherboard User Manual
7
Chapter 2
Installations
2.1 Memory Module
（
SODIMM
）
Installation
The I330 Motherboard provides one 200 -pin SODIMM slot. The socket supports up
to 2GB DDR2 400 SDRAM. When installing the Memory device, please follow the
steps below
：
Step.1. Firmly insert the SODIMM at an angle into its slot. Align the SODIMM on the
slot such that the notch on the SODIMM matches the break on the slot.
Step.2. Press downwards on SODIMM until the retaining clips at both ends fully snap
back in place and the SODI MM is properly seated.
Caution
!
The SODIMM only fits in one correct orientation. It will cause
permanent damage to the development board and the SODIMM if
the SODIMM is forced into the slot at the incorrect orientation.
