25
Chapter 3: Operating the Device
OSD icon
Sub-menu
Settings
Note
AUTO SETUP
*VGA CHANNEL ONLY
PRESS YES TO AUTO SETUP
Automatically adjusts screen size, H position, V position, Clock, Clock Phase
AUTO ADJUSTMENT
*VGA CHANNEL ONLY
ON/OFF
H Position, V Position and Clock Phase are adjusted automatically upon power on.
H POSITION
*VGA CHANNEL ONLY
slider bar
Controls the horizontal position of the image within the Display area of the LCD.
Press + to move right. Press - to move left.
V POSITION
*VGA CHANNEL ONLY
slider bar
Controls the vertical position of the image within the Display area of the LCD.
Press + to move up. Press - to move down.
CLOCK
*VGA CHANNEL ONLY
slider bar
Press + to expand the width of the image on the right of the screen.
Press - to narrow the width of the image on the left.
PHASE
*VGA CHANNEL ONLY
slider bar
Adjusts the visual “noise” on the image.
WHITE BALANCE
*VGA CHANNEL ONLY
YES/NO
Perform the white balance
SCALING
@ ASPECT
@ OFF
@ FULL
Adjust the image scaling setting
ADJUST RESET
YES/NO
Resets the following settings within the ADJUST menu back to factory setting.
VOLUME
slider bar
MUTE
ON/OFF
AUDIO RESET
YES/NO
Resets “AUDIO” settings back to factory settings.
PIP SOURCE
VGA
DVI
Composite
S-Video
PIP MODE
@OFF
@LARGE PIP
@SMALL PIP
@SIDE BY SIDE ASPECT
@SIDE BY SIDE FULL
Selects the size of the sub-picture used in Picture-in-Picture (PIP) mode.
PIP POSITION
BOTTOM RIGHT
TOP RIGHT
TOP LEFT
BOTTOM LEFT
Determines where the PIP appears on the screen.
PIP RESET
YES/NO
Resets the following settings within the PIP menu back to factory setting.
