15
Using Recovery Wizard to Restore Computer
Note:
Before starting the recovery process, make sure to backup all user
data. The data will be lost after the recovery process.
To enable quick one-key recovery procedure:
1. Connect the computer to the power source. Make sure the computer stays
plugged in to power source during the recovery process.
2. Turn on the computer, and when the boot screen shows up, press
Tab+ F6
to initiate the Recovery Wizard.
3. The following screen shows the Recovery Wizard. Click
Recovery
button to
continue.
4. A warning message about data loss will show up. Make sure the data is
backed up before recovery, and click
Yes
to continue.
Wait the recovery process to complete. During the recovery process, a command
prompt will show up to indicate the percent of recovery process complete. The
system will restart automatically after recovery completed.
Important:
Before starting the recovery process, remove the PCI/ PCIe card and
CFast card.
