5
Preface
Let service personnel to check the equipment in case any of the following problems appear:
o
The power cord or plug is damaged.
o
Liquid has penetrated into the equipment.
o
The equipment has been exposed to moisture.
o
The equipment does not work well or you cannot get it to work according to the
user manual.
o
The equipment has been dropped and damaged.
o
The equipment has obvious signs of breakage.
Do not leave this equipment in an uncontrolled environment where the storage temperature is
below -20°C (-4°F) or above 60°C (140°F). It may damage the equipment.
Caution
Use the recommended mounting apparatus to avoid risk of injury.
Warning!
Only use the connection cords that come with the product. When in doubt, please
contact the manufacturer.
Warning!
Always ground yourself against electrostatic damage to the device.
Important Information
Federal Communications Commission Radio Frequency Interface Statement
This device complies with part 15 FCC rules.
This equipment has been tested and found to comply with the limits for a class "B" digital device, pursuant
to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case the user will be required to correct
the interference at him own expense.
European Union
This equipment is in conformity with the requirement of the following EU legislations and harmonized
standards. Product also complies with the Council directions.
Electromagnetic Compatibility Directive (2014/30/EU)
EN55024: 2010+A1: 2015
o
IEC61000-4-2: 2009
o
IEC61000-4-3: 2006+A1: 2007+A2: 2010
o
IEC61000-4-4: 2012
o
IEC61000-4-5: 2014
o
IEC61000-4-6: 2014
o
IEC61000-4-8: 2010
o
IEC61000-4-11: 2004
EN 55032: 2015+AC: 2016
EN61000-3-2:2014
EN61000-3-3:2013
Low Voltage Directive (2014/35/EU)
EN 60950-1:2006/A11:2009/A1:2010/A12:2011/ A2:2013
Operation is subject to the following two conditions:
This device may not cause harmful interference.
This device must accept any interference received including
interference that may cause undesired operation.
