Winmate A831, User Manual

Page: 49 / 72

3.12 Supervisor / User Password Setting 3.12 Supervisor / User Password Setting
Steps to set supervisor/user password are described as follows: Steps to set supervisor/user password are described as follows:
¾
New password setting:
¾
New password setting:
1. While pressing <Enter> to set a password, a dialog box appears to ask
you enter a password.
1. While pressing <Enter> to set a password, a dialog box appears to ask
you enter a password.
2. Key in a new password. The password can not exceed eight
characters.
2. Key in a new password. The password can not exceed eight
characters.
Please Enter Your Password
3. System will request you to confirm the new password again.
Please Confirm Your Password
4. When completed, new code takes effect.
¾
No Password Setting:
If you wants to disable the password, just <Enter> as a password input is
requested.
¾
If you forget password:
If you forget the password, the only way to access the system is to clear the
CMOS memory. You may remove the battery from motherboard and put it back
to clear the setting.
A831 SBC User Manual
39 39