Winmate A830 SBC, User Manual

Page: 34 / 65

A830 SBC User Manual
26

Halt On
This item defines the operation of the system POST (Power -On Self Test)
routine. You can use this item to select which situation you want the BIOS
to stop the POST process and notify you.
The choice: “All errors”, “No Errors” or, “All, but keyboard”.

Base Memory/Extended Memor y/Total Memory
These items are automatically detected by the system at start up time.
These are display-only fields. You can not make change to these fields.
Follow steps as IDE adapter below:

IDE Adapters
The IDE adapters control the hard disk drive . Use a separate sub-menu to
configure each hard disk drive.
IDE HDD Auto-Detection
Press <Enter> to auto-detect HDD on this channel. If detection is successful,
it fills the remaining fields on this menu.

IDE Primary Master/Slave
Selecting ‘Manual’ lets you set the remaining fields on this screen and select
the type of fixed disk.
The choice: None, Auto, or Manual
Choose the access mode for this hard disk.

The choice: ”CHS”, ”LBA”, ”Large”, or ”Auto”.
Capacity
Note that the disk drive capacity (approx.) is usually slightly greater
than the size of a formatted disk given by a disk checking program.
Cylinder
Set the number of cylinders for this hard disk.

Min = 0, Max = 65535
Head
Set the number of read/write heads

Min = 0, Max = 255
Precomp
Warning: Setting a value of 65535 means no hard disk.

Min = 0, Max =65535
Landing Zone
Set the Landing Zone size.