
CDP2100
www.winkleraudio.cz
side 8 from 20
Warning – advice:
If the function PLAY/PAUSE is chosen, motor of CD drive is still going. Therefore
choose function STOP
in case you do not use CD player for a longer time. Motor of
CD player will have turned off till 2 minutes. You economize the CD drive this way.
MP3 CD Playback:
Functions are the same as with playing CD Audio, only with the difference of pressing
the wheel (6), when you switch between folders (
– Skip Folder) instead of shift
within the track. Other control is the same as with CD Audio. The function shift within
the track (SEEK) is not supported. Mode Multisession is not supported while reading file
system CD ISO9660. The system plays audio tracks located in first session. Output
S/PDIF is inactive while playing MP3.
Functions and Programming:
1
2
3 4
5 6
7
8 9
1.
Turning on/off the program
2.
Backward move in program
3.
Forward move in program
4.
Saving the program step
5.
Deleting the program step
6.
Insertion the program step
7.
Setup menu (setting the basic functions of CD player), temporarily turn on/off the
“MIDI” function in section “Play and Pause”
8.
Repeat (tracks or discs) – only if A-Pause is not tuned on. If A-Pause is turned on,
it switches the functions A-pause, A-pause(E), A-pause(B).
9.
Turning on/off A-PAUSE
REPEAT function:
By pressing button (8) you choose between function
- playing the whole disk
from the beginning to the end, and function
– repeating one track,
– repeating the whole disk (
repeating folder in MP3),
– playing disk in CD-A and then playing disk in CD-B, in case of setting this
function on both CD players, the playing order is followed: CD1 – CD2 – CD1
….following CD must be prepared in mode STOP, in case of other function
(PLAY/PAUSE) playing next CD does not start up.
A-PAUSE function:
To turn on/off A-Pause function use button A-Pause ON/OFF (9). The basic setting of
A-Pause means that the player stops after playing each track before starting playing next
one. If you press button PLAY/PAUSE during the playing, it will hold up playing and by
follow-up pressing PLAY/PAUSE, the playing will continue to the end of track.