Electrical data
Power supply
Solar-powered energy
storage
Service life in
darkness
Usually approx. 90h at
25°C in complete
darkness, up to 6 days
(144 h) if fully charged
Communication
Radio
EnOcean, unidirectional
Radio protocol EnOcean Equipment
Profile (EEP), D5-00-01
Frequency
Output (typ.)
868.3 MHz
5,7 dBm @ 50 Ohm
Typical ranges
Standard
values in
buildings
under
optimum
conditions
Plasterboard/timber
30m through max. 5 walls
Masonry
20m through max. 3 walls
Ferroconcrete
10m through max. 1 wall
4. Dimensions
5. Start-up
Before the start-up
These mounting instructions include the
installation and the teaching procedure of
Winkhaus wireless contacts on a window
or patio door. Every person in charge of
installation must have read and under-
stood these mounting instructions.
During installation and use it is important
to protect the wireless contact from heavy
shocks, as it may be damaged.
The wireless contact FM.A is not suitable
for outdoor use and in humid environment.
Preparation
The wireless contact FM.A is delivered
ready for use, but the energy storage
might be empty if it was stored for a long
period. The energy storage is refilled
automatically with the aid of the solar cell
in daylight. If the wireless contact FM.A
does not react to the teaching procedure,
it should be charged in a bright place for a
few hours. (The contact must not be
exposed to direct solar radiation).
Teaching procedure
In order to make rational use of the
wireless contact it is necessary to teach it
in with a compatible smart home system or
another compatible component (e. g. En-
Ocean-compatible relays, actuators etc).
Step 1: Activate the teaching mode
For starting the teaching procedure you
first need to switch the smart home system
or the subsequent component into the
teaching mode. (How this is done you can
learn from the operating instructions of the
smart home system or the subsequent
component.)
