background image

English

ZERO+ WiFi

INSTALLING THE FILTERS 

Ÿ

Install the filters until they fit securely in 
place.

Filters must be installed in this order:

 3 

 True HEPA filter with Cleancel™ 

(rear)

 2 

 CD Carbon filter 

(middle)

 1 

 Pre-filter 

(front)

 

ˍ

To install the pre-filter, insert bottom tabs 
into the slots on either side of the lower part 
of the unit, then rotate upward to insert the 
upper tabs into the slots at the top part of 
the unit until both sides audibly click into 
place.

Pre-filter 

CD Carbon 
filter 

True HEPA
filter with
Cleancel™

Ź

Replace the front panel by first inserting 
the latch at the bottom edge into the 
base of the unit, then rotate the panel 
upward toward the top of the unit until it 
magnetically snaps closed.

ź

When to service and replace filters:

Filter

Indicator Light

When to 

service

When to 

replace

 1 

 Pre-filter

none

Clean once every 

14 days

Permanent

 2 

 CD Carbon filter

Can NOT be 

WASHED

Lasts up to 

6 ~12 months

 3 

  True HEPA filter 

  with Cleancel™

ę

 Intervals between filter replacement may vary depending on environment.

ę

  For optimal use, Pre-filter can be cleaned every 14 days which can extend the life of 
 other filters.

this unit

is compatible

with this 

ĆOWHU

FILTER

ITEM: 117130

J

Summary of Contents for ZERO+


























Reviews: