background image

Close water supply valve.

Pull front cover out to take it off.

Replace old filter with a new filter.

Put front cover back by pushing
it back into position.

Open water supply valve to resume
operation

Water supply
valve handle

14

13

OPTIONAL WATER FILTERS REPLACEMENT

Models

W-3C, W-3D

Press Cold water lever with
cup for momentary water flow.

Pull Cold water lever up for
continuous water flow. Pull lever
back down to stop water flow.

Press Hot water lever with cup simultaneously with
Hot Water Safety Switch for momentary water flow.

COLD WATER DISPENSER

HOT WATER DISPENSER 

OPERATION

▶Continuous water flow is not available on Hot Water dispenser.

Note

ENERGY SAVING MODE: HOT/COLD WATER MODELS(W-3D, W-3TD)

Depending on your specific
needs and natural
conditions such as weather
and/or seasons, you can
turn Water Cooling and/or
Heating systems On/Off at
your convenience.

Operate the Hot/Cold
Water Switch to
❶“`ON”position to get

Hot/Cold Water

❷“Off”position to get

water at the
temperature of the room.

■`

Replace Optional water filters on a regular basis to maintain
performance and efficiency of your product.

MAINTENANCE

Summary of Contents for W-3C













Reviews: