Page 9
TimelapseCam User Guide
Page 12
TimelapseCam User Guide
Imprint Info?
Use the
Up/Down
buttons to choose between:
YES
- Camera Name, Time, etc, information will be imprinted at the bottom of the image/
video as an information bar
Note: Remember to input the camera name in the setup and set the clock accordingly.
NO
- No information bar will be imprinted.
Press the
OK
button to confirm the selection. Press the
Right
button to move to the next option.
IMPRINT INFO?
YES
CAMERA NAME
TIMELAPSECAM
Setting Camera Name
Press the
OK
button. Use the
Up/Down
and
Left/Right
buttons to select an identity for your
camera. For example, you can use a name or a location; the identity you wish to use is up
to you. Press the
OK
button to confirm the selection. Press the
Right
button to move to the
next option.
WI-FI SD CARD?
NO
Wi-Fi SD Card
Select option when using a Wi-Fi enabled SD card. Turning this feature on will keep the SD
port powered for a set amount of time to allow the files to transfer off the card to the Wi-Fi
network set up.Press the
OK
button to confirm the selection. Press the
Right
button to move
to the next option.
NOTE: Wingscapes does not offer technical support for Wi-Fi SD cards. Please contact your
Wi-Fi card’s manufacturer for support. Before use, you must set up your Wi-Fi SD card on
your wireless network.
NOTE: Use of a Wi-Fi SD Card will decrease the battery life of the camera.
This easy-to-use software allows you to advance through the series of images a number of different ways:
SEARCh REgION
Click on Set Search Region Button.
This allows you to define a specific search
area, rather than the whole photo. Drag the
red outline to the area you want to search.
This allows you to focus on a very precise area
if required.
SEARCh STEPS
This allows for even faster scans by skipping
the selected amount of images (1-50). The
higher this setting, the lower the search
results as it is ignoring selected photos. You
may find this option helpful if you have a
very large quantity of photos to scan.
Click OK.
Click on Motion Search Advance button.
BEgIN/END
Goes to the first or last photo in the Plot File.
FRAME BY FRAME SEARCh
Individually step forward or backward through each photo.
REWIND/PAUSE/PLAY
Play photos in sequence, pause, or play the photos in reverse order.
These functions simulate a video and are useful for manually searching
changes in the photos. When a sequence is being played, press
fast-forward or fast-rewind multiple times to increase speed. (1x-5x)
SEARCh
This function allows quick scanning of images foreword and back. The
scan pauses when the software detects a change in pixel content from
the last photo viewed. We detect change based on averages so it
will not be as accurate as a manual frame by frame search.
Viewing Time Lapse
AC CONNECTED?
NO
AC Connected
Press the
OK
button. When the camera is connected to an AC power supply and this option is
selected, the camera will remain on instead of going to a sleep state between detection and
capture sequences. This will greatly improve camera speed and performance and can be used
in conjunction with most external supplies, but is only recommended when connected to an
AC power supply. In the event this option is selected but no external supply is detected, it will
default to the NO state. Press the
OK
button to confirm the selection. Press the
Right
button
to move to the next option.
