Fig 10-28 Rollers - lift
5
NOTE:
The oil baffle has four parts.
) and locking tabs.
6
Remove the pipe (007) from the oil baffle.
7
Remove and discard the O-ring (009).
8
Remove the three Allen screws (010).
9
Put two M8 screws into the holes (001).
10
Tighten the two M8 screws to loosen the oil baffle.
11
Remove the two M8 screws.
12
From the segment (003), remove the four screws (006) and the locking tabs.
13
Remove the segment (003).
14
Turn the remaining segments counterclockwise until you can get access to the segment
(004).
15
to remove the to remove the other segments (004, 005, 002).
X82-B
AA00-5581-01AAA-523A-A
Maintenance Manual
Supply unit camshaft and bearing shell - prepare before removal
Winterthur Gas & Diesel Ltd.
- 602 -
Issue 001 2020-10
Summary of Contents for X82-B
