WinGD X62DF, Maintenance Manual

Page: 28 / 902

1.4 Data module codes (procedural data)
This manual is divided into several data modules. Each data module is identified with a unique
data module code, refer to
Table 1-2 - Data module codes (procedural data) . The structure of
the data module codes is as follows:
• ??##-####-##???-###?-? (structure)
• AA00-5556-00AAA-520A-A (example).
Tab 1-2 Data module codes (procedural data)
Code Description Length/type Property Example
??
1
Alternative versions/designs of items.
Used when two or more items could be
installed in the engine as alternatives
for the same function (for example tur-
bochargers from different suppliers) 2 alphabetic
characters [A-Z] sequential,
starts with AA AA
##
2
Applicability related to cylinder number.
00 = applicable to all engines inde-
pendent of the number of cylinders;
## = applicable only to engines with
that specific number of cylinders. 2 numeric char-
acters [0-9] arbitrary 00
####
2
WinGD design group number 4 numeric char-
acters [0-9] arbitrary 5556
## 2 Used for sequential numbering for the
physical breakdown of components; 00
= complete component, 01 = first
breakdown; for illustrated parts (tools) it
is used for sequential numbering of da-
ta modules. 2 numeric char-
acters [0-9] sequential,
starts with 00 00
??? 1 Used for alternative items differing in
design but not enough to change the
variant code (for example AAA = Bear-
ing shell No.1; AAB = Bearing shell No.
2 to #) 3 alphabetic
characters [A-Z] sequential,
starts with AAA AAA
### 2
Shipdex information code, for example
520 = Remove procedure 3 numeric char-
acters [0-9] Shipdex specif-
ic 520
? 1
Shipdex information code variant. Used
to differentiate different procedures de-
fined by the same information code for
the same DMC/Hardware section. 1 alphabetic
character [A-Z] variable A
X72DF
AA00-0000-00AAA-018E-A
Maintenance Manual Data module codes (procedural data)
Winterthur Gas & Diesel Ltd.
- 28 - Issue 002 2020-10