WinGD WARTSILA RT-flex58T-E, Maintenance Manual

Page: 237 / 504

Maintenance
3303 − 4/A1
RT-flex58T-E
Winterthur Gas & Diesel Ltd.
7/ 7
3. Fitting
Fitting the connecting rod is carried out analogously to the removal, but in reverse
sequence, whereby attention must be paid to the instructions 3303 − 1 to 3303 − 3 .
For the assembly bearings and bearing pins must be in perfect condition. They
must be smeared lavishly with fresh bearing oil.
Measure the clearances according to Clearance Table
0330 − 1 ’Top and bottom
end bearings to connecting rod’.
Attention! Always fit toggle lever in such a way that its curvature stands upwards.
After completing the work retaining pins 94323 and all other tools must be removed
immediately from the crankcase.
2013
Connecting Rod: Removal and Fitting
CHECK