WinGD RT-flex50DF, Maintenance Manual, Page: 131 / 586

Maintenance
2124 − 2/A1
Winterthur Gas & Diesel Ltd.
3/ 8
2.1 Lifting Tool − Install
1) Put the two flange couplings (94201C,
Fig. 3 ) in position on the cylinder
liner (1).
2) Apply Molyslip Copaslip paste to the
threads of the screws (3).
3) In each flange coupling, torque the four
screws (3) to 140 Nm.
4) Use the engine room crane to put the
lifting tool (94201) in position on the
cylinder liner (1).
5) Apply Molyslip Copaslip paste to the
threads of the special screws (2).
6) Attach the two holders (94201B) to the
flange couplings (94201C) with the
special screws (2).
7) Torque the special screws (2) to
140 Nm.
8) Connect the crane hook to the shackle
of the lifting device (94201, Fig. 4 ).
9) Operate the engine room crane to
carefully lift the cylinder liner together
with the water guide jacket.
10) Move the cylinder liner cylinder liner
over the rail unit.
11) Lower the cylinder liner on to an
applicable wooden underlay.
2016
Cylinder Liner: Removal and Fitting
WCH03060
1
I
I
94201C
WCH02342
94201C
94201B
94201
Fig. 3
2
2
3
2
94201
Fig. 4