Initial Setup Process (cont)
9
13. After purchasing data and reopening the Winegard App you will
have a message that you have finished setting up the Roadlink C2
unit. Click on the Close button.
14. Be sure that your device is connected to the Togo Roadlink C2
system and that your Internet source is 4G as shown below. Once the
Signal Strength indicator shows a signal and you are connected to
Togo Roadlink AT&T, you are ready to use the previously purchased
data plan.
NOTE:
Activation can take up to 30 minutes.
15. You may now connect all other wireless
enabled devices to your Roadlink C2 by
selecting the correct SSID and entering
the correct password. Once an internet
connection has been made, all devices that
are connected to the Roadlink C2 will have
access to the internet.
Operating Features
Slideout Menu -
Test Internet Speed,
Find My Device (GPS),
Account Information,
Support and more.
Tap to see signal
strength of the 4G or WiFi
connection.
Information Icon -
Helpful hints and tips
can be found here.
Connection Information -
Device name,
Local Network name,
Internet Source,
and software version.
In the Settings screen
you
are able to change the Local
and Guest Network Name
(SSID) and passwords.
In the Advanced Settings
screen you are able to
change the IP address,
modify saved WiFi networks,
perform a factory reset, and
reboot the system if needed
(recommended to
NOT
make changes).
Before 4G Connection
After 4G Connection
4G Signal
C Widgets
Tower Finder
Setup
Manual
Channel Strength
Settings