3
STEP 7.
Install connectors on downlead and set 2 cable
as shown on page 4. Attach antenna downlead cable to
jack on power supply marked “ANT”. See Figure 7.
FIGURE 7
FIGURE 8
FIGURE 9
FIGURE 10
FIGURE 11
CHECKING POWER SUPPLY OPERATION
(Power Supply not supplied with RS-3460)
1. Tune TV receiver to nearest station.
2. Turn off switch on power supply.
Picture on TV receiver should be
considerably degraded with power off.
3.
This unit is equipped with a
polyswitch,
(current limiting de-
vice), which will shut down +12 VDC
if there is a direct short in the cable
between antenna and power supply.
Red indicator light will not light.
Once short is eliminated, device
will reset itself.
STEP 8.
Install terminals on wires from +12 VDC source
as shown in Fig. 8. Crimp terminals with Craftsman type
4 crimping tool in Fig. 9 or equivalent. Push wires onto
tabs on terminal board as shown in Figure 10. If in doubt
as to the polarity of the wires, connect them temporarily
to tabs on circuit board in Fig. 10 and move switch on front
of outlet to left, (in Fig. 11) if light comes on polarity is
correct.
STEP 9.
Mount power supply in wall with screws pro-
vided and attach TV coax cable to jack on front. Connect
TV coax cable to TV set. Move switch on front of outlet
to the left and check that light is on.
POLYSWITCH
WINEGARD MOBILE PRODUCTS LIMITED WARRANTY
(2 YEARS PARTS; 1 YEAR LABOR)
Winegard Company warrants this product against defects in materials or
workmanship for a period of two (2) years from the date of original purchase.
During year one (1) of such warranty, Winegard Company will also pay
authorized labor costs to an authorized Winegard dealer to repair or replace
defective products. No warranty claim will be honored unless at the time
the claim is made, Customer presents proof of purchase to an authorized
Winegard dealer (to locate the nearest authorized Winegard dealer, contact
Winegard Company, 3000 Kirkwood Street, Burlington, Iowa 52601,
Telephone 800-288-8094 or visit www.winegard.com). Customer must
provide proof of purchase with a dated sales receipt for the Winegard product
to verify the product is under warranty. If the date of purchase cannot be
verified, the warranty period shall be considered to begin thirty (30) days
after the date of manufacture.
If a defect in material or workmanship is discovered, Customer may take
the product to an authorized Winegard dealer for service. Customer must
provide proof of purchase to verify the product is under warranty. If the
product is brought to an authorized Winegard dealer for service prior to
expiration of year one (1) of the warranty period and a defect in material or
workmanship is verified by Winegard Technical Services, Winegard
Company will cover the Winegard dealer’s labor charges for warranty
service. The Winegard dealer must contact Winegard Technical Services
in advance for pre-approval of the service. Approval of the service is at
the sole discretion of Winegard Company.
Alternatively, Customer may ship the product prepaid to Winegard Technical
Services (located at 3111 Kirkwood Street, Burlington, Iowa 52601,
Telephone 800-788-4417). Customer must return the product along with a
brief description of the problem and provide Winegard Technical Services
with Customer’s name, address, and phone number. Customer must also
provide proof of purchase to verify the product is under warranty. If the
product is returned before the expiration of the warranty period, Winegard
Company will (at its option) either repair or replace the product.
This Limited Warranty does not apply if the product has been damaged,
deteriorates, malfunctions or fails from: improper installation, misuse,
abuse, neglect, accident, tampering, modification of the product as originally
manufactured by Winegard in any manner whatsoever, removing or
defacing any serial number, usage not in accordance with product
instructions or acts of nature such as damage caused by wind, lightning,
ice or corrosive environments such as salt spray and acid rain.
This Limited
Warranty also does not apply if the product becomes unable to perform its’
intended function in any way as a result of the television signal provider
making any changes in technology or service.
RETURN AUTHORIZATION POLICY
A Return Material Authorization (RMA) is required prior to returning any
product to Winegard Company or Winegard Warranty Services under this
warranty policy. Please call our Technical Services Department at 800-788-
4417 or send an e-mail to
to obtain the RMA
number. Please furnish the date of purchase when requesting an RMA
number. Enclose the product in a prepaid package and write the RMA
number in large, clear letters on the outside of the package. To avoid
confusion or misunderstanding, a shipment(s) without an RMA number(s)
or an unauthorized return(s) will be refused and returned to Customer freight
collect.
WINEGARD COMPANY DOES NOT ASSUME ANY LIABILITIES FOR ANY
OTHER WARRANTIES, EXPRESS OR IMPLIED, MADE BY ANY OTHER
PERSON.
ALL OTHER WARRANTIES WHETHER EXPRESS, IMPLIED OR
STATUTORY INCLUDING WARRANTIES OF FITNESS FOR A
PARTICULAR PURPOSE AND MERCHANTABILITY ARE LIMITED TO
THE TWO YEAR PERIOD OF THIS WARRANTY.
In states that do not allow limitations on implied warranties, or the exclusion
of limitation of incidental or consequential damages, the above limitations
or exclusions do not apply.
Some states do not allow limitations on how long an implied warranty lasts,
or the exclusion of limitation of incidental or consequential damages, so the
above limitations or exclusions may not apply to you.
This warranty gives Customer specific legal rights. Customer may also
have other rights that may vary from state to state
SATELLITE RECEIVER WARRANTY
See manufacturer’s limited warranty policy.
WS-MOBWARREV2 Rev. 1/10
at +12 VDC.
