background image

ROADSTAR

RV AND VAN TV ANTENNA

MODELS RS-2000 & RS-3460/RS3460B

Made in U.S.A.

INSTRUCTIONS

Winegard Company

3000 Kirkwood St., Burlington, IA 52601-2000

Printed in U.S.A.  2451806    © Winegard Company, 1998, 2004, 2006   Rev.3  10/10

SPECIFICATIONS

Bandpass

VHF/FM ..............................

54 to 216 MHz

UHF ....................................

470 to 810 MHz

Amplifier Gain ......................

VHF* ..................................

15.5 dB avg.

UHF ....................................

19.5 dB avg.

Impedance ............................

75 ohm unbalanced

Response ..............................

.25 dB per 6 MHz

VSWR ....................................

1.8:1 max.

Power Required ....................

+12 VDC at 85 ma

Weatherproof Housing .........

Weatherable

                                                UV stabilized
                                                copolymer

WINEGARD

®

*Has fixed FM trap to reduce interference.

DESCRIPTION

Winegard's RoadStar

TM  

omnidirectional antenna provides

excellent reception of VHF/UHF TV channels. The
RoadStar compact modern styling is unobtrusive and
blends well with the designs of recreational vehicles. The
UV stabilized copolymer housing makes the antenna
virtually impervious to weathering and color change.

The unique omnidirectional characteristics provide ex-
cellent reception in areas where stations are in different
directions without the need for a complex rotor system.
A built-in amplifier provides up to 6 times the received
signal on VHF and 9 times the UHF signal insuring the
best possible reception in color and black and white.

The RS-2000 package includes antenna, +12 VDC power
supply with two-way splitter, 30' downlead cable, 6' TV set
cord, hardware and mounting bracket.

PARTS LIST (RS-2000) White Housing

1

Amplified Antenna

2120415

6

10-32 Hex Nut, Nylock

2160216

1

Power Supply with Hardware

2120123

1

30' Coaxial Cable

2753015

1

6' Coaxial Cable

2753752

3

Roof Mounting Brackets

3720303

6

#10 x 1" Thread Cutting Screws

2160178

1

Bolt, 1-14 x 1" Nylon

3200350

1

Mounting Plate

3710248

6

10-32 x 5/8" Bolt

2160173

6

Washer, #10 Aluminum

1140302

PARTS LIST (RS-3460) White Housing

 (RS3460B) Black Housing

1

Amplified Antenna (white)

       2120415

Amplified Antenna (black)

       2120404

6

10-32 Hex Nut, Nylock

2160216

3

Roof Mounting Brackets

3720303

6

#10 x 1" Thread Cutting Screws

2160178

1

Bolt, 1-14 x 1" Nylon

3200350

1

Mounting Plate

3710248

1

Coaxial Cable Boot

3200154

6

10-32 x 5/8" Bolt

2160173

6

Washer, #10 Aluminum

1140302

TM

CLEANING ANTENNA HOUSING

The surface of the antenna is a tough laminated
ultraviolet shield. Clean only with mild soap and
water. 

Use no solvents, alcohol, or cleaning

fluids.

Summary of Contents for ROADSTAR RS3460B

Page 1: ...rotor system A built in amplifier provides up to 6 times the received signal on VHF and 9 times the UHF signal insuring the best possible reception in color and black and white TheRS 2000packageincludesantenna 12VDCpower supplywithtwo waysplitter 30 downleadcable 6 TVset cord hardware and mounting bracket PARTS LIST RS 2000 White Housing 1 AmplifiedAntenna 2120415 6 10 32 Hex Nut Nylock 2160216 1 ...

Page 2: ... shown in Figure 6 Applyapprovedsealantforyourtypeofroofaroundholes under each bracket Attach antenna to roof with 10 x 1 thread cutting screws STEP 6 The power supply wall outlet assembly may be flushmountedinmoststandardelectricalboxes Toflush mount cut a hole in wall to fit the box Run 2 12 wires between wall outlet and 12 VDC source and route downlead cabletothislocation Installcablebetweenset...

Page 3: ...negard Technical Services in advance for pre approval of the service Approval of the service is at the sole discretion of Winegard Company Alternatively Customer may ship the product prepaid to Winegard Technical Services located at 3111 Kirkwood Street Burlington Iowa 52601 Telephone 800 788 4417 Customer must return the product along with a brief description of the problem and provide Winegard T...

Page 4: ...the power supply to the antenna Repair replace cable 6 If 12 VDC is not present at test point 2 check that theredindicatorisON Ifnot checkthepolarityofthered whitewiresandcheckthe 12VDCsource Ifthereisstill no 12 VDC replace the power supply HOWYOUR SYSTEM WORKS WHAT TO DO WHEN YOUR RV TV ANTENNA IS NOT WORKING PROPERLY INSTALLING COAX CABLE ON FC 5910 CONNECTORS STEP 1 Strip outer cover back 1 2 ...

Reviews: