background image

ANTENNA & MOUNT

 

Height when raised   

 

30” vertical max.

 

Height in the travel position   

8” max.

 

Operating radius 17”   

 

(34” diameter circle)

 

Roof space required 

 

26”

 

LNB 

   

 

 

Compatible with DIRECTV

®

, DISH

®

, and

 

 

 

   

 

 

Bell TV™ (northern U.S. and Canada)

 

Weight     

 

 

12 lbs 

 

Color     

 

 

Cool gray

 

Antenna height 

 

 

20.9” 

 

Antenna width 

 

 

19.2” 

 

F/D 

   

 

 

0.59

 

Offset angle 

 

 

24°

 

Frequency range   

 

10.95 - 12.75 GHz

 

Gain:   

 

11.2 GHz  

 

 

33.22 dBi

 

12.1 GHz  

 

 

33.89 dBi

 

12.6 GHz  

 

 

34.23 dBi

 

Aperture efficiency   

 

73%

 

Cross polarization (on axis)   

-21 dB

 

*Beam width at -3 dB 

 

3.5°

 

*Beam width at -10 dB 

 

7.0° 

 

Ship weight: 

 

 

20.6 lbs

DIRECTV

®

 is a registered trademark of DIRECTV, Inc., a unit of Hughes Electronics Corporation.

DISH

®

 is a registered trademark of DISH Network L.L.C.

Bell TV™ is trademark of Bell Canada, Inc.

Printed in U.S.A.  Winegard Company • 3000 Kirkwood Street • Burlington, Iowa 52601-2000  © Winegard Company, 2009  2452168  REV6  12/12

WINEGARD MOBILE PRODUCTS LIMITED WARRANTY

(2 YEARS PARTS; 1 YEAR LABOR)

 

Winegard Company warrants this product against defects in materials or workmanship for a period of two (2) years from the date of original purchase. During year one 

(1) of such warranty, Winegard Company will also pay authorized labor costs to an authorized Winegard dealer to repair or replace defective products.  No warranty claim 

will be honored unless at the time the claim is made, Customer presents proof of purchase to an authorized Winegard dealer (to locate the nearest authorized Winegard 

dealer, contact Winegard Company, 3000 Kirkwood Street, Burlington, Iowa 52601, Telephone 800-288-8094 or visit www.winegard.com). Customer must provide proof 

of purchase with a dated sales receipt for the Winegard product to verify the product is under warranty. If the date of purchase cannot be verified, the warranty period 

shall be considered to begin thirty (30) days after the date of manufacture.

  If a defect in material or workmanship is discovered, Customer may take the product to an authorized Winegard dealer for service. Customer must provide proof of 

purchase to verify the product is under warranty.  If the product is brought to an authorized Winegard dealer for service prior to expiration of year one (1) of the warranty 

period and a defect in material or workmanship is verified by Winegard Technical Services, Winegard Company will cover the Winegard dealer’s labor charges for 

warranty service. The Winegard dealer must contact Winegard Technical Services in advance for pre-approval of the service.  Approval of the service is at the sole 

discretion of Winegard Company.  

  Alternatively, Customer may ship the product prepaid to Winegard Technical Services (located at 3111 Kirkwood Street, Burlington, Iowa 52601, Telephone 800-788-

4417). Customer must return the product along with a brief description of the problem and provide Winegard Technical Services with Customer’s name, address, and 

phone number. Customer must also provide proof of purchase to verify the product is under warranty. If the product is returned before the expiration of the warranty 

period, Winegard Company will (at its option) either repair or replace the product.  

 

This Limited Warranty does not apply if the product has been damaged, deteriorates, malfunctions or fails from:  improper installation, misuse, abuse, neglect, 

accident, tampering, modification of the product as originally manufactured by Winegard in any manner whatsoever, removing or defacing any serial number, usage not 

in accordance with product instructions or acts of nature such as damage caused by wind, lightning, ice or corrosive environments such as salt spray and acid rain. This 

Limited Warranty also does not apply if the product becomes unable to perform its’ intended function in any way as a result of the television signal provider making any 

changes in technology or service.  

RETURN AUTHORIZATION POLICY

   A Return Material Authorization (RMA) is required prior to returning any product to Winegard Company or Winegard Warranty Services under this warranty policy. Please 

call our Technical Services Department at 800-788-4417 or send an e-mail to [email protected] to obtain the RMA number. Please furnish the date of purchase when 

requesting an RMA number.  Enclose the product in a prepaid package and write the RMA number in large, clear letters on the outside of the package.  To avoid confusion 

or misunderstanding, a shipment(s) without an RMA number(s) or an unauthorized return(s) will be refused and returned to Customer freight collect.

  WINEGARD COMPANY DOES NOT ASSUME ANY LIABILITIES FOR ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, MADE BY ANY OTHER PERSON.

  ALL OTHER WARRANTIES WHETHER EXPRESS, IMPLIED OR STATUTORY INCLUDING WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND 

MERCHANTABILITY ARE LIMITED TO THE TWO YEAR PERIOD OF THIS WARRANTY.

  In states that do not allow limitations on implied warranties, or the exclusion of limitation of incidental or consequential damages, the above limitations or exclusions do 

not apply.

  Some states do not allow limitations on how long an implied warranty lasts, or the exclusion of limitation of incidental or consequential damages, so the above limitations 

or exclusions may not apply to you.

  This warranty gives Customer specific legal rights. Customer may also have other rights that may vary from state to state

SATELLITE RECEIVER WARRANTY

 See manufacturer’s limited warranty policy.

WS-MOBWARREV2

Rev. 1/10

Specifications

Summary of Contents for RM-EX02












Reviews: