9
Parts/Specifications/Warranty
Electronics Specifications
Primary Power ................................. +12 VDC
Power Consumption ........................... 3 amps
Operating Temperature
Interior ................................... 32° to 120°F
Exterior ............................... -10° to +130°F
Humidity ........................ 90% noncondensing
Size ................... 4-1/2"W x 4-1/4"H x 1-3/4"D
Weight ..................................................... 1 lb.
Mount Specifications
Height Lowered .......................................... 8"
Height Raised ..................... 30" vertical max.
Roof space required .......... 40"L x 20"W min.
Turning diameter clearance ..................... 33”
Antenna Movement ................... 2 DC motors
Weight ................................................. 16 lbs.
Shipping Weight .................................. 20 lbs.
Carton ......... 27-3/4"L x 20-3/8"W x 10-3/4"D
Dish Specifications
Reflector Diameter .................... 46 cm (18")
Antenna height ..................................... 53 cm
Antenna width ...................................... 49 cm
Gain at mid-range
11.2 GHz .............................. 33.22 dBi
12.1 GHz .............................. 33.89 dBi
12.6 GHz .............................. 34.23 dBi
Effective aperture ................................. 46 cm
Aperture efficiency .................................. 73%
Cross polarization (on axis)... .............. -21 dB
Beamwidth at -3 dB .................................. 3.5
o
Beamwidth at -10 dB ................................ 7.0
0
F/D Ratio ................................................. 0.59
Frequency Range ................ 10.95-12.75GHz
Offset angle ............................................... 24
0
Gauge .................. 22 gauge galvanized steel
Finish: ......... Textured thermoset powder coat
Returned units damaged in shipping due to improper packing will be charged to the dealer/customer.
TWO YEAR LIMITED WARRANTY
Winegard Company warrants this Winegard product (excluding receiver) against any defects in materials or workmanship within
two (2) years from date of purchase. No warranty claim will be honored unless at the time the claim is made, you present proof of
purchase to an authorized Winegard dealer (if unknown, please contact Winegard Company, 3000 Kirkwood Street, Burlington, Iowa
52601-2000, telephone 319-754-0600).
Winegard Company (at its option) will either repair or replace the defective product at no charge to you. This warranty covers parts,
but does not cover any costs incurred in removal, shipping or reinstallation of the product. This limited warranty does not apply if the
product is damaged, deteriorates, malfunctions or fails from: misuse, improper installation, abuse, neglect, accident, tampering,
modification of the product as originally manufactured by Winegard, usage not in accordance with product instructions or acts of nature
such as damage caused by wind, lightning, ice or corrosive environments such as salt spray and acid rain.
The Two Year Warranty is provided on the condition that the equipment is properly delivered with all handling and freight charges
prepaid to your Winegard dealer for repair or return to our factory at the above address. Winegard dealers will arrange for the
replacement or repair and return to you, without charge, the product which failed due to defective material or workmanship.
WINEGARD COMPANY WILL NOT ASSUME ANY LIABILITIES FOR ANY OTHER WARRANTIES, EXPRESS OR IMPLIED,
MADE BY ANY OTHER PERSON.
ALL OTHER WARRANTIES WHETHER EXPRESS, IMPLIED OR STATUTORY INCLUDING WARRANTIES OF FITNESS FOR
A PARTICULAR PURPOSE AND MERCHANTABILITY ARE LIMITED TO THE TWO YEAR PERIOD OF THIS WRITTEN WARRANTY.
The foregoing shall be the sole and exclusive remedy of any person whether in contract, tort or otherwise, and Winegard shall not
be liable for incidental or consequential damage or commercial loss, or from any other loss or damage except as set forth above.
Some states do not allow limitations on how long an implied warranty lasts, or the exclusion of limitation of incidental or consequential
damages, so the above limitations or exclusions may not apply to you.
This warranty gives you specific legal rights and you may also have other rights which vary from state to state.
Parts included
18 “Reflector
Backup structure
Mount base/turret
Mount cover & bracket
Vent tube
Cable entry plate
Hardware
Cable
Interior wall plate controller
Surface mount box
Tools needed for installation
Level
Tape measure
Phillips screwdriver
Electrical tape
Cutter
Electric or cordless drill
1/8” drill bit (for pilot holes)
7/16” wrench (for dish assembly)
5/16” socket/nut driver
1-1/2” hole saw (cable entry hole)
Sealant compatible with roof material (check
with your vehicle manufacturer for compatibility)
