Antenna Assembly, Cont.
Then, slide one of the forks of the matching transformer between the
two forward elements on the threaded post. Repeat this process for the
other post. Tighten the nuts, making sure the matching transformer is still
connected.
Remove the backing from the ‘HD’ label, and carefully place the label
over the front of the UHF element so that it covers the center block of
the elements.
Check that you are within a 35 mile range of the stations that you want to
receive. For a listing of likely channels available in your area, go online to
dtv.gov/maps.
Position the antenna toward the broadcast tower for optimal reception. For
most locations, stations will only come from one or two directions. If the
compass headings are similar (<30° apart), the FreeVision antenna can be
aimed between the two areas and receive signals from each location.
Run a channel scan. If not satisfied with the channels found, try
repositioning the antenna and running another channel scan.
Forward Elements
HD Label
1 2
7
6
9
8
10
For Sales Information Please Contact RoadTrucker Inc (www.RoadTrucker.com)
8312 Sidbury Rd.; Wilmington, NC 28411 - (800) 507-0482 / (910) 686-4281
