9
Before You Start
The wine cellar should be placed in a location where the ambient temperature is between
60-80
°
Fahrenheit. If the ambient temperature is above or below this range, the
performance of the unit may be affected. For example, placing your unit in extreme cold
or hot conditions may cause interior temperatures to fluctuate.
Setting the Temperature Control
NOTE: The temperature readout shows the actual cellar temperature, it will
temporarily show the set temperature while making adjustments, then reverts
back after 5 seconds.
1.
Make sure power cord is connected to a properly grounded outlet.
2.
Turn power ON.
3.
Set the desired temperature by pushing the Temp UP or DOWN button.
4.
Temperatures increase or decrease 1°F with each push of the UP or
DOWN button.
NOTE:
Temperatures may fluctuate depending on whether the interior light is ON
or OFF and depending on the position of the bottles.
Lock or Unlock the Control Panel
To LOCK or UNLOCK the control panel:
1.
Simultaneously press the _ and + buttons for 5 seconds
2.
The control panel will beep when the status has changed.
Interior Light
•
To complement the look of your wine collection, a LED lighting has been built
into the wine cellar. Simply push the "Light" button and the light comes on, push
again for off. For maximum energy efficiency, leave light off when not viewing
your collection.
Adjusting the Light Intensity
You can adjust the intensity of the LED lighting intensity from 100% down to 25%
•
Unlock the control panel if it is locked
