2.
The Upper Wine Zone temperature display
(3)
will start flashing.
3.
Set the desired temperature by pushing the
+
(2)
or
–
(4)
button.
4.
The temperature increases or decreases 1°F with each push of the
button.
5.
Press the Temperature Set button
(5)
again, the Lower Drawers Zone
display
(7)
will start flashing.
6.
Set the desired temperature by pushing the
+
(6)
or
–
(8)
button.
7.
The operating panel will automatically exit programming mode after being
idle for 5 seconds.
NOTE:
Temperatures may fluctuate depending on whether the interior light
is ON or OFF and depending on the position of the bottles.
Reprogramming the Temperature Ranges
The default temperature setting for the upper and lower zones is 41°F -
72°F. The ranges can be modified to suit your wine and beverage storage
preferences; minimum temperature of 34°F (lower zone)/41°F (upper zone)
and a maximum of 72°F (both zones).
1.
Press and hold the
Light (1) & Set
(5)
buttons simultaneously for 15
seconds until you hear a beep. Then release the buttons.
2.
Press the
Light
(1)
button (only) to select the zone. The zone will show
in the left display window
(3)
and the temperature will show in the right
display window
(7).
a.
P01: the lowest temperature of upper zone
b.
P02: the highest temperature of upper zone
c.
P03: the lowest temperature of lower zone
d.
P04: the highest temperature of lower zone
3.
Use the
+
(2)
and
–
(4)
buttons to adjust the temperature
4.
Repeat the steps in #2 and #3 for each setting you want to change
5.
The operating panel will automatically exit programming mode after being
idle for 10 seconds.