Assembly GUIDE
or visit
wineracksamerica.com
Questions?
888.373.6057
Top Horizontal Display
Page 2
1. Find an open, flat area in which to work. Carefully remove all components from the box and remove any packaging
materials. Check the parts list to verify package contents.
1
START WITH
4 CORNERS
2.
Begin by attaching 4 metal rods into the pre-drilled holes on the four corners of each side piece. Using an allen wrench
or drill, carefully attach each metal screw to the 4 metal rods. Make sure that the metal screws are attached to the side
with the countersunk holes. Do not tighten until ALL metail rods have been attached. Make sure all of the holes
line up evenly. (figure 1)
3. Attach the remaining metal rods to the side panels using the provided metal screws. (figure 2)
Do not tighten screws until ALL rods have been attached. After they are attached, carefully tighten each metal
screw all the way. *Do not overtighten.
2
ATTACH REMAINING
METAL RODS
Bottom
Top
