Assembly GUIDE
or visit
wineracksamerica.com
Questions?
888.373.6057
Top of rack
Standard Tasting Table
Page 2
1. Find an open, flat area in which to work. Carefully remove all components from the box and remove banding
with a utility knife. Check the parts list to verify package contents.
1
BEGIN WITH BACK
OF RACK
2.
Arrange the end ladders on the floor so that the bottle support pieces face one another. Align the large gaps on each
end ladder. The end with the larger gap is the top of your rack. Attach a standard 8 column connector to the top
and bottom of your rack using the screws provided. Make sure the connectors are flush with the top and bottom
of your rack. (figure 1)
* Minimize the risk of splitting your ladders by drilling a 1/16" pilot hole before driving the wood screws.
For best results, drive the screw most of the way in with your drill, then finish tightening by hand.
3. Insert the middle ladders and finish securing the top & bottom connectors using the screws provided. (figure 2)
2
FINISH SECURING BACK
CONNECTORS
