Assembly GUIDE
or visit
wineracksamerica.com
Questions?
888.373.6057
Page 2
1. Find an open, flat area in which to work. Carefully remove all components from the box and remove any packaging
materials. Check the parts list to verify package contents.
1
START WITH
4 CORNERS
2.
Begin by attaching 4 metal rods into the pre-drilled holes on the four corners of each side piece. Using a screwdriver
or drill, carefully attach each metal screw to the 4 rods.
Do not tighten until ALL wood rods have been attached.
Be sure that the notches on the side panels are both facing inwards and at the bottom. (figure 1)
3. Attach the remaining rods to the side panels using the provided metal screws. (figure 2). After all rods are attached,
carefully tighten each metal screw all the way. *Do not overtighten.
2
ATTACH REMAINING RODS
Notches
Full Height Label-OUT Display
