Assembly GUIDE
or visit
wineracksamerica.com
Questions?
888.373.6057
Base Horizontal Display
Page 3
4. Slide the bottom panel into the two grooves on each side panel. Using the provided wood screws, attach the bottom
panel to each side panel. (figure 3)
5. At this point, there is no specific front of the rack. Choose the side of the rack that you would like to be the front
and secure the bottom trim piece. The bottom trim piece should be flush with the bottom of the rack.
We recommend that you use a finish nailer to drive a nail through the trim piece into each side frame piece.
If you do not have a finish nailer, drive one of the provided finish nails into each side frame piece using a hammer
until it is flush with the surface trim piece. Use wood glue for added support.
Fill the nail holes using the wood putty provided. Push a small amount of putty into each hole and wipe excess putty
off the surface using a damp cloth.
(figure 4)
3
ATTACH BOTTOM
PANEL
BOTTOM PANEL
4
ATTACH
TRIM PIECE
