Wine Guardian Pro DP200, Installation, Operation And Maintenance Manual

Page: 44 / 58

44
Inspection and Start-up Checklists
Receiving and Inspecting

Unit received undamaged

Unit received complete as ordered including accessories
Handling and Installing

Unit mounted on solid level surface

Sufficient space allowed for access to unit and accessories. Proper electrical service
provided

Hot water provided to humidifier

Drain lines and trap installed properly

Ductwork, fittings and grilles installed properly

All cold duct surfaces insulated

Low ambient control included if freezing condition present. No obstructions to air
flow to condenser
Starting-up the Unit

General visual inspection looks good. All wiring connections checked

All ducts, grilles and panels in place

Start unit

Check ducts and connections for air leaks

Balance air distribution

Confirm condenser airflow is unrestricted

Verify cooling and heating operation

Check for excessive noise or vibration