5
(b) Installation of Unit as a Built-In Cellar
The cutout dimension illustrated below allows for door clearance and access to the pull-out shelves when installed
as a built-in appliance.
If installing between frameless cabinets,
a ½” wide filler strip or side panel may be needed on hinge side. The filler
strip will act as a spacer between the appliance case and adjacent cabinet door swing.
These cut out dimensions show the minimum space required for your wine cellar to perform as designed.
Note:
If your cabinets are less than 35 ¼” in height, you can remove the leveling legs on the bottom of the wine
cabinet to reduce it’s height by ½”. You must use shims to level the cabinet if you remove the leveling legs.
