19
Maintenance
MAINTENANCE
DAILY
WEEKLY
MONTHLY
100
HRS
200
HRS
Check batteries after charging; add water if necessary
*
Check pad wear to prevent buildup of chemicals
*
Check linkages and connectors for wear and damage
*
Check hoses for wear, blockages, or damage
*
Clean squeegee; check for adjustment; inspect for
wear
*
Check handles, switches, knobs, domes, and gaskets
for damage
*
Clean out recovery tank
*
Clean out solution tank; remove and clean screen
*
Clean outside of all tanks; check for damage
*
Run vac motor for at least one minute to allow motor to
dry
*
Store with dome off tank to allow the tank to dry
*
Check scrub deck skirt
*
Check batteries for corrosion, cracks and evidence of
overheating
*
Check all bearings for noise
*
Check all gaskets for wear and leakage
*
Check vac motor carbon brushes
*
Check brushes for wear; ensure bristles are not
damaged
*
Check linkages for wear and damage
*
Grease transaxle
*
Grease wheels and casters
*
Check squeegee blades for wear and frame for
damage
*
Check overall performance of machine
*
Clean batteries and terminals
*
Check parking brake (inspect cables, linkages and
pulleys)
*
Check carbon brushes in all vacuum, brush drive, and
propel motors
*
Blow out dust in motors
*
Inspect motor commutators
*
Clean chains, cables and pulleys
*
Clean pivot points on squeegee and scrub deck
linkages
*
86400410 Operators Manual - Cutter Euro 36V Standard