Windsor Versamatic Plus VSP14, Manual

Page: 10 / 16

Clearing blockages
Blockages in the hose can be cleared by taking
the hose off the machine and reversing it in the
connecting tube
holding it upright with
one hand blocking the top and switching on
the machine. If necessary rapidly lift your hand
on and off the end of the hose.
Changing the brush strip
To replace brush strip: Remove brush strip
cover (32). Turn brush roller so that the brush
strip can then be pulled out. Ensure that the
new brush strip is fully inserted.
Replace the brush strip before the bristles
wear down to the level of the support rod.
Maintenance
CAUTION Maintenance and
repairs must be done by qualified
personnel.
WARNING To reduce the risk of
electric shock unplug before
cleaning or sewicing.
To change the printed circuit board (43)
remove the 3 screws of the suction tube cover
(42). Inside release the wires and slide the
board out.
To get access to the suction motor remove the
dust bag housing bumper (44) and remove the
four screws on the motor cover (8).
To remove the power head cover, take off the
brush strip cover (32) and remove the four
large screws from underneath the chassis.
The cover can then be lifted off.