1
Handle grip
1
2
On/Off switch
2
3
Handle assembly
3
4
Retaining ring
4
5
Cover release
6 Dust bag housing
6
7
Cover
7
8
Housing release
8
9
Head
9
10
Cable
10
11 Telescopic handle
11
12
Hose
12
13
Carrying handle
13
14
Cable hook
14
15
Attachment tube
15
16
Crevice nozzle
16
17
Upholstery nozzle
17
18
Foot pedal
Preparation
Place the
head on a flat
surface
wlth the neck (20) and the support lever (21)
upright, Hold the dust bag housing vertically
and place over neck and support lever. Push
firmly down so that the housing release
snaps closed.
Lift the catch (22) then slot the handle
assembly into the top of the dust bag housing
(6) and push firmfy down.
When me handle has been pushed down as
far as it will go press catch (22) down. If the
handle is not pushed fully down the machine
will not work.
Insert attachment tube (23) into the channel at
the back of the machine. Locate the handle
(11) on the holder (24).
Open retaining
(4) by pushing round a
quarter of a turn. Insert hose end into
connecting tube (26) ensuring that it is
pushed fully in. Return retaining
to
closed position.
Insert crevice nozzle and upholstery nozzle
into me recesses in the back of the machine.
