Windsor RRB 360, Operator'S Manual, Page: 19 / 60

English
19
1 Check the sweeping roller and the side
brush for wear and wrapped belts.
2 Check the sweeping track and the func-
tion of the roller brush and the side
brush.
3 Check tension, wear and tear and func-
tioning of the drive belts.
4 Check moving parts for freedom of
movement.
5 Check functioning of all operating ele-
ments and control lamps.
1 Check tension, wear and tear and func-
tioning of the drive belts.
2 Check moving parts for freedom of
movement.
3 Check the seal strips on the dust filter
and the function of the filter shaker.
4 Check the gasket in the sweeping area
for position and wear.
5 Check the sweeping track and the func-
tion of the roller brush and the side
brush.
6 Clean and check the dust filter, replace
if necessary.
7 Check the sweeping roller and the side
brush for wear and wrapped belts.
8 Check functioning of all operating ele-
ments and control lamps.
9 Check the washers for wear, replace if
required.
10 Check the acid level in the batteries
(only for maintenance-free batteries).
1 Check current-carrying lines and con-
tacts for damages and oxidation.
2 Check drum brake for function and set-
ting.
3 Check the seal profile on the waste con-
tainer and the brush roller box.
4 Check batteries.
5 Clean the battery surfaces.
6 Check carbon brushes for wear and
tear.
1 Replace belt.
2 Replace carbon brushes.
3 Check front wheel for wear, replace if
required.
Only for authorized technicians!
Maintenance Works
After the first month or 5 operating
hours
Every 50 operating hours
Additional maintenance work every 100
operating hours or semi-annually
Additional maintenance work every 500
operating hours or annually