background image

SAFETY 

86309580   FLOOR POLISHER 10/08/08 

2-1

IMPORTANT SAFETY INSTRUCTIONS 

When using an electrical appliance, basic precaution 

must always be followed, including the following: 

READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE. 

 

To reduce the risk of fire, electric shock, or injury: 

 

Use only

 indoors. Do not use outdoors or expose to rain. 

 

Use only

 as described in this manual. Use only manufacturer’s recommended components and attachments. 

 
If the machine is 

not working properly

, has been dropped, damaged, left outdoors, or dropped into water, 

return it to an authorized service center. 
 

Do not

 operate the machine with any openings blocked. Keep openings free of debris that may reduce 

airflow. 
 

Machine can cause a fire

 when operating near flammable vapors or materials. Do not operate this machine 

near flammable fluids, dust or vapors. 
 

This machine is suitable for commercial use, for example in hotels, schools, hospitals, factories, 
shops and offices for more than normal housekeeping purposes. 
 

Maintenance and repairs 

must be done

 by qualified personnel. 

 

During operation

, attention shall be paid to other persons, especially children. 

 

The machine shall only

 be operated by instructed and authorized persons. 

 

When leaving unattended

, unplug the machine. 

 

Do not

 handle the plug or machine with wet hands. 

 

Do not

 unplug machine by pulling on cord. To unplug, grasp the plug, not the cord. 

 

Do not

 use with damaged cord or plug. Follow all instructions in this manual concerning grounding the 

machine. 
 

Do not

 pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or 

corners. 
 

Do not

 pull/run machine over cord. 

Keep

 cord away from heated surfaces. 

 

Connect to a 

properly

 grounded outlet. See Grounding Instructions.

 

 
 
 

 

 

SAVE THESE INSTRUCTIONS 

Summary of Contents for Floor Polisher SP13-10090220


































Reviews: