Windsor Clipper CLP, Owner'S Manual

Page: 2 / 16

1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
When using an electrical appliance, basic precaution must
always be followed, including the following:
This machine is for commercial use.
Do not operate without filters (dry or wet) in place.
Use only as described in this manual. Use only manufacturer’s recommended attachments.
Use indoors only. Do not use outdoors and do not expose to rain.
Machine can cause a fire when operating near flammable vapors or materials. Do not operate this
machine near flammable fluids, dust or vapors.
Do not pick up flammable fluids, dust or vapors.
Do not vacuum anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
Do not handle the plug or machine with wet hands.
Do not leave the machine unattended. Unplug machine from outlet when in use and before servicing.
Do not leave the machine unattended. Unplug machine from outlet when not in use and before servicing.
Do not unplug machine by pulling on cord. To unplug, grasp the plug, the cord.
Do not use with damaged cord or plug. Follow all instructions in this manual concerning grounding the
machine.
If the machine is not working properly, has been dropped, damaged, left outdoors, or cropped into
water, return it to an Authorized service center.
Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around
sharp edges or corners.
Do not pull/run machine over cord. Keep cord away from heated surfaces.
Do not allow to be used as a toy. Close attention is necessary when used by or near children.
Do not operate machine with any openings blocked. Keep openings free of debris that may reduce
airflow.
Keep hair, loose clothing, fingers, and all parts of the body away from openings and moving
parts.
Use extra caution when cleaning on stairs,
Do not use machine as a step.
Connect to a properly grounded outlet. See Grounding Instructions.
Maintenance and repairs must be done by qualified personnel.
Rotating fan blades inside the cover. Before opening cover, switch off machine. Wait until the fan/brush
stops completely or dust and debris may be ejected.
7/1/97