Windsor Chariot 2 iVac 24 AVT, Operating Instructions Manual, Page: 21 / 122

21
Operations
To Stop Vacuuming
1. Remove foot from throttle pedal allowing pedal to
return to neutral.
2. Turn machine power off or switch to transport only
mode.
FOR SAFETY: Before leaving or servicing machine:
stop on level surface, turn off machine and remove key.
FOR SAFETY: When using machine, go slow on
inclines.
Changing Vacuum Bag
A convenient bag storage is built into side of machine.
1. Park machine on level area.
2. Turn the machine power off.
3. Unlatch and open top of machine.
4. Remove backing from vacuum bag’s sealing tag.
Seal top of bag.
5. Remove full vacuum bag from vacuum bag
housing.
6. Clean vacuum bag housing and remove any
debris.
7. Tilt back panel to retrieve a new clean paper bag
from the storage compartment in left side wall of
main cover.
8. Return back panel to operating position.
9. Unfold bag. There is a notch in cardboard on top of
bag. Align notch with housing front edge aligning
tab. Slightly bow cardboard to slide under
housing’s front and rear retaining tabs.
10. Close and latch machine top.
Retaining Clips
Vacuum Bag Storage Compartment
Vacuum Bag Housing Alignment Tab
86374850 Chariot iVac 24