Windsor Carpet Maintainer IM 10066360, Operating Instructions Manual

Page: 16 / 53

16 86269870 CARPET MAINTAINER
Maintenance
Machine Maintenance
The Maintainer requires very little maintenance. Wipe
down the machine periodically with a clean cloth. DO
NOT spray water directly over the top of machine.
Deformation of the brush bristles can result in unbal-
anced running and excessive vibrating or jumping.
The machine is fitted with a circuit breaker. In the
unlikely event of overloading, the circuit breaker will
automatically trip. It can be reset after approximately 30
seconds (or when the machine cools down) by pushing
the set button located on the cover housing.
Daily Maintenance
1. Clean and inspect brushes.
2. Clean and inspect brush housing, debris tray and
machine. Rinse debris tray if needed.
3. Inspect power cord for wear or damage. This cable
will lie on wet carpet. To prevent electrical shock
replace cords that are frayed or have cracked insu-
lation immediately.
4. Flush the tank, pump and spray jet with hot water
(Deluxe only).
5. Clean Strainer.
Periodic Maintenance
1. Check all handles, switches, electrical cables and
connections on your machine for damage. Repair
or replace immediately.
2. Inspect and/or replace brushes.
Replace brushes when main bristles are worn to
the same level as the yellow indicator bristles.
3. Check spray pattern. Clean or replace jet if the
pattern is blocked or uneven
Annual Maintenance
1. Check all bearings for noise and wear.
2. Check motor for operation.
3. Check overall machine for operation.
4. Check belts for wear and change belts every
second year.