MACHINE OPERATION
86038440 VACPAC 07/22/08
3-2
EQUIPMENT SET-UP
1.
Insert hose (90° swivel cuff end) into top of
unit. Attach desired cleaning tool.
2.
Unclip waist and sternum straps. Loosen
shoulder straps and hip belt.
3.
Put on unit by placing arms through shoulder
straps and secure and tighten the hip belt.
(For the most comfort, adjust unit so that the hip
belt covers the front hipbones and the bowed-out
portion of the back padding rests on the small of
the back.)
4.
Tighten the shoulder straps to the point where
the unit’s weight just starts to pull down on the
shoulders. Ideally most of the unit’s weight will
remain on the waist.
5.
Adjust the sternum strap position to be high on
the chest and tighten till comfortable.
6.
Plug in power cord from machine into properly
grounded wall outlet (see grounding
instructions).
OPERATION
The unit is a commercial vacuum designed for dry
pick-up only.
1.
Place a paper bag inside the cloth bag in the
vacuum chamber. Be sure the foam filter is in
place at the bottom of the chamber.
2.
Attach the accessories to be used.
3.
Put unit on back and adjust straps.
4.
Plug unit into properly grounded wall outlet
(see grounding instructions).
5.
Turn machine on or off using switch on left
side of machine.
6.
To empty, remove the cover and dump paper
bag into trash receptacle. Shake cloth bag
vigorously each time paper bag is emptied to
prevent soil build-up, which would clog filter.
The straps are easily adjusted while the unit
is being worn.
1. To loosen lift up on tab.
2. To tighten pull on strap.
