WEA 102 install 0510-UK ©WindowMaster 2009,2010 ®WindowMaster is a registered trademark used under license by WindowMaster Group
2. Declaration of conformity
We hereby confirm that power supply WEA 102 complies with
- EMC directive 89/336/EEC, as amended (91/263/EEC, 92/31/EEC, 93/68/EEC)
- Low Voltage Directive 73/23/EEC as amended (93/68/EEC) and
- EIB Handbook version 3 Volume 4 Part 2 (Electrical Safety, EMC, environmental conditions) and
Volume 9 part 1/Part 2/del 3 (Electrical and mechanical features standardized EIB).
WindowMaster A/S: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
(Jan Norup, Manager Product Solutions)
Skelstedet 13, DK-2950 Vedbæk, 25. May 2010 Declaration no. 029 0510 CE
3. Placement and functions of LEDs- and switches
Picture 2
A1 Bus terminal red-black (low current terminal)
A2 Reset-contact
A3 Bus terminal yellow-white (low current terminal)
A4 Red LED – indicates that the WEA 102 is positioned in reset mode
A5 Green LED – indicates that the WEA 102 is working correct
A6 Red LED – indicates that the bus line is overloaded or short circuited
A7 Plug-in terminals for connection supply voltage (net terminal)
A8 Earth terminal
Installation conditions
The instrument can be used for permanent installations indoor in dry rooms for built-in distribution board or cabinets with
DIN-rail.
Warning
The product must be built-in to a powercurrent distribution board (230/400).
The product must be installed and started by an authorized electrician.
For safety reasons it must be possible to disconnect the WEA 102.
The existing safety precautions must be kept.
The product must not be opened.
The planning and working on electric systems must respect all relevant national guidelines, directions and regulations.
2
