6
5
4. Open lid of water reservoir. Fill carafe with cold water and pour into reservoir. Do not exceed
maximum water level shown by red ball indicator on front of unit. (To enhance heat-retention
capabilities of thermal carafe, rinse it with warm water before using.)
5. Set filter basket on top of empty carafe and place on coffee maker. Press brew select button
twice to activate coffee maker. The green On indicator light will illuminate. (See
PROGRAMMABLE DIGITAL TIMER
section for automatic brewing instructions.)
6. When coffee has finished brewing, remove filter basket from carafe and replace with
carafe lid.
7.
To place lid on carafe:
Place lid on carafe and turn in a clockwise direction until tight.
8.
To serve coffee:
Twist lid in a counterclockwise direction until arrow on lid is pointing directly
at spout of carafe. Pour coffee.
9.
To remove lid:
Turn lid counterclockwise another 90° from pour position. Pull lid off.
AUTOMATIC SHUT-OFF FEATURE:
The coffee maker will automatically shut itself off and the
indicator light will go out when brewing is complete. Coffee maker can be turned off manually at
any time by pressing brew select button until all lights are extinguished. Coffee may be kept hot
for an extended period by removing the carafe and filter basket from unit and then placing
thermal lid on carafe.
NOTE:
Caution should be exercised when handling coffee maker while it is plugged in and
operating. Although base plate of unit has been treated with a special insulating material so it will
not harm thermal carafe, temperature will be hot enough to burn skin.
CAUTION: Do not place carafe on any hot surface, as this may cause glass interior of carafe
to break.
FOR A SECOND POT:
Turn unit off and allow to cool for 10 minutes before brewing a second pot.
If less than 10 minutes elapse, hot water left in the tubes could splash out. To avoid this, rinse
carafe, replace filter and add fresh coffee. Replace carafe and use another container to pour cold
water into water reservoir. Use the red ball indicator to determine water level.
PROGRAMMABLE DIGITAL TIMER
SETTING THE CLOCK
1. Plug power cord into wall outlet. The clock display will begin to flash.
2. Press the hour button and hold until hour is set. Clock display features both an AM and PM
indicator, so be sure to check to see that hour is correct before releasing button.
3. Repeat procedure with minute button.
SETTING THE TIMER
1. Coffee maker can be programmed to turn on automatically anytime within a 24-hour period.
Press program (PROG) button. The word "BREW" and 12:00 will appear on display.
2. While holding program button down, set hour (H) and minute (MIN) buttons to desired
brew time.
3. Release program button, and current time will reappear on display.
4. Press brew select (SELECT) button once. Red auto light will go on to indicate that automatic
brewing option has been activated.
5. When selected time is reached, coffee will begin to brew. Red auto light will go off and green
On indicator will illuminate.
6. Coffee maker will shut off automatically after brewing is complete.
This appliance requires little maintenance. To reduce the risk of electric shock, do not open or
remove bottom cover of unit. It contains no user serviceable parts. Do not try to repair it yourself.
Refer it to qualified personnel if servicing is needed.
TO CLEAN:
After coffee has been brewed and served, be sure coffee maker is turned off and
allowed to cool completely. Discard the paper filter and its contents, then clean individual parts of
unit as follows:
Filter Basket --
Wash in dishwasher (top rack only) or by hand in hot, sudsy water.
Water Reservoir --
Rinse with hot water and air dry.
Thermal Carafe --
Wipe outside with a soft, damp cloth. Rinse inside with hot, sudsy
water and air dry
.
DO NOT IMMERSE CARAFE IN WATER OR USE
ABRASIVE SOAPS OR SCOURING PADS FOR CLEANING. DO NOT PUT
THE CARAFE IN A DISHWASHER.
Coffee Maker --
Wipe exterior with a soft, damp cloth and dry. Do not use abrasive
soaps or scouring pads.
SPECIAL CLEANING INSTRUCTIONS: If coffee stains appear on the glass liner of the carafe, fill
carafe with hot water and add a denture cleansing tablet. Allow it to stand for 10 minutes and then
rinse out. For heavier staining, it may be necessary to repeat the procedure.
At least once a month, pour 1/2 liter of white vinegar into water reservoir. Add cold water until red
ball indicator on coffee maker indicates that reservoir is full. Place a filter in filter basket, place
basket on carafe and set on coffee maker. Press brew select button twice. Allow water and
vinegar mixture to steam and drip until red ball on water level indicator is at the six-cup level. Turn
unit off for about fifteen minutes. After fifteen minutes have elapsed, turn unit on again, and allow
remainder of liquid to drip into carafe. Turn unit off and discard liquid.
Allow unit to cool for 10 minutes, then rinse as follows: Fill water reservoir with clean, cold water.
Insert new filter in filter basket. Place basket and carafe on coffee maker, turn unit on and allow all
water to drip into carafe. When finished, turn unit off. Wash and dry carafe and filter basket. After
unit has cooled, wipe it off with a dry cloth.
TO STORE:
Unplug unit; store in its box in a clean, dry place. Never store it while it is hot or still
plugged in. The cord can be wound and stored in the cord storage compartment located on the
back of the unit.
Never wrap the cord tightly around the appliance.
Do not put any stress on the
cord where it enters the unit, as it could cause the cord to fray and break.
CARE AND CLEANING
2000_10_5_26_CAN.PDF 11/3/00 5:43 PM Page 6