FOR YOUR SAFETY
3
6
IMPORTANT INSTRUCTIONS
Read and save these important safety instructions before using this unit . When
using electrical appliances, basic safety precautions should always be followed
including the following:
1) Use this unit only as described in this manual. Other uses not recommended
may cause fire or electric shock.
2) This product is intended for household use ONLY and not for commercial,
industrial or outside use.
3) To protect against electrical shock, do not place unit in window, immerse unit,
plug or cord in water, or spray with liquids.
4) Close supervision is necessary when any appliance is used near children or
physically disabled people.
5) Unplug the unit from the outlet when not in use, when moving from one
location to another and before cleaning.
6) Do not operate the unit in the presence of explosive and/or flammable fumes.
7) Do not place the unit or any parts near an open flame, cooking or other
heating appliance.
8) Do not operate the unit with a damaged cord, plug, after a malfunction or
if dropped or damaged in any manner.
9) Avoid contact with ultrasonic misting plate when unit is plugged in and
when unit is in operation.
10) To disconnect, grip the plug and pull it from the wall outlet. Never yank
the cord.
11) The use of attachments is not recommended and may cause hazards.
12) Always use on a dry level surface.
13) Do not operate if the unit housing is removed or damaged.
14) FOR INDOOR USE ONLY.
THIS PRODUCT IS EQUIPPED WITH A POLARIZED A.C. (Alternating Current)
PLUG — a plug having one prong wider than the other. This plug will fit into the
power outlet only one way. This is the safety feature. If you are unable to insert
the plug fully into the outlet, try reversing the plug. If the plug should still fail to
fit, contact an electrician to replace the obsolete outlet. DO NOT DEFEAT THE
SAFETY PURPOSE OF THIS POLARIZED PLUG.
WARNING: To reduce the risk of fire or electrical shock, DO NOT USE THIS
UNIT WITH ANY SOLID STATE SPEED CONTROL DEVICE.
SAVE THESE INSTRUCTIONS
Plug the unit into an available 120V ~ 60Hz outlet.
NOTE: Indicator light will illuminate when unit is plugged in to show that
power is going to the unit.
Turn the control knob clockwise to the desired misting level. To turn the unit off,
turn the control knob counter-clockwise to the OFF position.
NOTE: Unit will automatically shut off when the water tank is empty.
OPERATING INSTRUCTIONS
OFF
POWER
MAX
INTELLIGENT HUMIDIFICATION
- It is best to keep the overall room humidity level between 30-50 percent.
- The comfort level of humidity will vary from room to room and with
changing room conditions.
- In cold weather, windows and even some walls may fog or develop frost from
excessive indoor humidity. If this occurs, reduce the mist intensity setting to
avoid damage from condensed water dripping on windowsills and walls.
- Too much humidity in the room may allow moisture to accumulate on surfaces
where bacteria and fungi can grow. Moisture that gathers may also damage
furniture, walls and wallpaper.
- To eliminate excessive humidity, especially in smaller rooms, leave the room
door open and adjust the mist intensity control accordingly.
