5
12V DC Power Charging
1. Make sure the unit off before charging.
2. Connect the male end of the 12V DC charger into the
DC input port of shaver and then insert the plug into a
12V power receptacle or cigarette lighter.
3. A green charging indicator light will illuminate on
the 12V charger to verify proper connection and
operation.
4. The yellow charge indicator light will illuminate on
the shaver while charging and will go off when fully
charged.
5. Charging and operating time:
Time to achieve full charge = 6 – 8 hours
•
Run time from a full battery until the low battery
•
indicator illuminates = 45 – 50 minutes
Quick Charge for 1-2 hours = 10 – 15 minutes
•
BEFORE USING FOR THE FIRST TIME, WE
RECOMMEND FULLY CHARGING USING EITHER THE
120V OR 12V CHARGER.
SHAVING INSTRUCTIONS
When using a new shaver, an adjustment period should
be expected to allow your skin to get used to the new
shaver and allow you to develop an effective shaving
style.
Before shaving:
1. Make sure the shaving blades and foils are installed
correctly
(see To Reinstall Blades & Foils in the
cleaning section below)
. Never operate shaver with
loose or broken blades or foils.
2. Always use a clean, dry shaver.
3. For best results, use on a freshly washed and dried
face.
To Shave:
1. Remove the protective cover from the shaver heads.
2. Turn on the shaver by pressing the On/Off button
once.
3. Hold the shaver so that all three heads touch the face.
Using it at an angle so that only one head touches the
skin may cause irritation to the skin and excessive
wear to one head.
4. Apply gentle pressure and use short, circular motions
as you move the shaver across your face. Pressing
too hard flattens the skin and whiskers, which is
ineffective and prematurely wears out the blades.
5. Clean the blade and foil assembly after every shave
(see cleaning section)
.