Wincor Nixdorf TH320, Programmer'S Manual

Page: 69 / 157

TH320/TH420 Programmers Guide
61
In the tables you will see that there are 7 input attributes and 9 outputs. It is expected that the
alternate color attribute will be used most. For example, when the alternate color attribute is combined
with the reverse substitution attribute, the result is white characters on a color background. The color
reverse attribute without alternate color will print black text on a color background. Any mappings utilizing
compressed and/or double-wide attributes will effect the length of a line and could cause unintended line
wraps. Mappings containing double-high attributes could cause unintended receipt lengths.
When both attribute mappings are set, processing is perform in order sequence. When two text attribute
substitutions contain conflicting dependent remapping, the result is undefined.
Related information
This command is utilized in the WN utility. The utility can be used to pre-configure new printers with a
default colorization set-up without requiring any application changes. The default set-up was designed to
provide a general level of colorization features that would not affect the printer operation. You can expand
beyond the default features of the utility by modifying the application at the host. However, do not attempt
to modify the settings within the utility.
f = 1: s = 1H
a = 30H
f = 2: s = 32H
r = 19H
f = 3: s = 1H
r = 7H
t = 1H
f = 4: s = 30H
a = A0H
Convert 6-dots/ mm bitmap to 8-dots/ mm bitmap
ASCII AX EOT n
Hexadecimal 1F 04 n
Decimal
31 04 n
Value:
0 = Off
1 = On
(When 0 and 1 are the LSB)
Default: 0 (Off)
Selects or cancels 6-dot/mm to 8-dot/mm graphic emulation.
When the 6-dot/mm emulation is selected, logos and graphics are expanded horizontally and vertically
during download to emulate their size on a 6-dot/mm printer. The horizontal positioning commands
also emulate positioning on a 6-dot/mm printer.