Smart Card Reader (SCR Module)
General
The SCR module is delivered in two variants, depending on which side of
the screen module (right or left) it is to be installed. The connection to the
BEETLE system is made via a powered COM interface (COM2-4).
How to Operate
Run the smart card through the slot of the smart card reader from front to
back. Make sure that the chip shows to the left.
When using smart cards, the following should be observed:
n
smart cards should never be allowed to come into contact with liquids.
n
smart cards should not be bent or folded in any way.
n
smart cards should not be allowed to come into close contact with a
magnetic field.
Smart cards should only be inserted in the top of the specially designed slit
of the reading device. If the card is inserted in another place, the contacts
could be damaged.
7
GENERAL
