Wincor Nixdorf KA21, Product Manual, Page: 20 / 26

KA21 Product Manual 15
Bore holes on the base plate for fixing (see fig.):
Bore 1 -4: Fixing bore recommended by Wincor Nixdorf
Bore 5 -8: Additional fixing holes
Emergency manual release A: Position of bore (with diameter of at least
8 mm)
Make sure to mount the base plate evenly and horizontally to the
cash desk. In case there is still a gap/crack between the rear
border of the base plate and the cash desk after the installation of
the KA21, we recommend to seal it, e.g. with some silicone resin.
So coins could not find their way into.
If you mount the KA21 on to a cash desk which is open to the bottom you
should use cap nuts, thus preventing possible risk of injury.
min. 2 mm: Surrounding minimum distance to the base plate with sunk
cash drawer
A bore hole (diameter 8 mm) may be drilled at position A (see
Fig.) under the emergency opening in the checkout desk if your
company permits access to the emergency opening of the KA21
with a screwdriver. The installation kit contains a M3 x 3 mm torx
screw. Be sure to use only this type of screw.
Make sure beforehand that the emergency opening function is allowed.