Take hold of the USB connector housing and
release the connection.
Release the TFT connector by pressing the
latches on the left and right inwards.
Mounting the cable cover
The scope of supply of your BEETLE /XS includes a cable cover. Before
mounting the device, you should first remove the cable openings where
necessary.
Tools are not required as the plastic parts can be removed by hand.
In order to mount the cable cover, insert it in the guide
and turn it to the
BEETLE box. Press from the inside against the exterior and pull it to the
rear side until it is fixed
on the back of the BEETLE box. In doing so,
ensure that the cable cover does not fit askew.
13
BEFORE SWITCHING ON THE SYSTEM
