The minimum distances listed in the figure must be maintained; otherwise, a
sufficient ventilation of the equipment is not guaranteed.
The BEETLE /M-II plus is designed for horizontal mounting (see dimensions
on page 43).
If you install the BEETLE /M-II plus in vertical position, you have attend to
the following:
n
Three breakable bore holes are located at the underside, which allow the
BEETLE /M-II plus to be suspended by means of the screws.
n
Mind the following minimum clearances also for vertical mounting to
ensure sufficient ventilation:
forward: 100 mm,
backward: 60 mm
sideways (left): 50 mm
n
A surface made of nonflammable material (e.g. concrete or metal) must
be located underneath the vertically mounted power supply unit.
Moun ting the Ca ble Co ver
Before mounting the optional cable cover, you should first remove the cable
openings where necessary. This depends on the cables which you wish to
lay.
Tools are not required as the plastic parts can be removed by hand.
MOUN TING THE CA BLE CO VER
12