Wincor Nixdorf BEETLE /iPOS plus, User Manual

Page: 16 / 83

10 BEETLE /iPOS plus User Manual
When opening the device or handling modules fitted with ESD, please ob-
serve the following instructions, which pertain to all electrostatic sensitive
devices (ESDs):

Always use the antistatic kit.

Statically discharge yourself, for example by touching an earthed ob-
ject (such as a heat radiator) before beginning to work with ESD-
labeled components.

Likewise, all equipment and tools used in working with such compo-
nents must be free of static charge.

Pull the mains plug before inserting or removing such components.

Only handle such components by their edges.

Never touch any terminal pins of the strip conductors on such compo-
nents.
Safety Notes
The BEETLE /iPOS plus conforms to the current safety standards for data
processing equipment.

If this device is taken from a cold environment into the operating
room, moisture condensation may form. The device must be
absolutely dry
before being put into service; an acclimatization
period of at least two hours must therefore be observed.

This device is equipped with a safety-tested power cable and may be
connected only to a prescribed grounded-contact power socket.

When setting up the device, ensure that the power socket on the
device and the grounded-contact power socket are easily accessible.

Whenever work of any kind is done on the device, as well as when
data cables are plugged and/or unplugged, the device must be com-
pletely disconnected from the line voltage. To do so, turn the device
off and unplug the power cord.

To disconnect the device from the supply voltage completely, switch
off the device and disconnect the power plug of the system.

Never plug in or unplug data communication lines during thunder-
storms.