Technical Data
n
AT plug-in board, half length, ISA bus in ter fa ce; ISA bus 8 bit
n
2 COM in ter fa ces:
COM5*, COM6* with + 5 V/+ 12 V po wer supp ly
n
2 ad di tio nal COM in ter fa ces (op tio nal for BEET LE /XL)
COM7, COM8 (AT stan dard) or
COM7*, COM8* with + 5 V/+ 12 V po wer supply
n
Po wer supp ly for the COM in ter fa ces (COM5*, COM6*, COM7*,
COM8*):
+ 5 V @ max. 300 mA COM (5 to 8)
+ 12 V @ max. 900 mA COM (5 to 8)
The total power consumption of all power- supplied interfaces must not
exceed 900 mA at + 12 V. The maximum power consumption at a single
interface must not exceed 600 mA at + 12 V. The total power consumption
of all power-supplied serial interfaces must not exceed 300 mA at + 5 V.
This applies to the COM board, but the current output of the system’s power
supply can also have an influence. Please contact Wincor Nixdorf for
detailed information.
n
UART Type NS16C552 Dual Uni ver sal
n
ICs CMOS, ALS-TTL, SMD
n
Quarz 1.8432 MHz
n
Sys tem soft wa re RDI Rev. 3.40
Ope ra ting sys tem MS-DOS up from ver si on 5.0, Wind ows 3.x with se ve re
re stric tions - not for use with BEET LE sys tems Wind ows 95, Wind ows 98
Wind ows NT 3.51 or hig her.
16
TECHNICAL DATA
